Process Validation of Sertraline Hydrochloride 50 mg tablets
DOI:
https://doi.org/10.7439/ijpc.v6i9.3554Abstract
The purpose of present research work wasto study Process Validation of Sertraline hydrochloride 50 mg tablet dosage form. As in a pharmaceutical product the quality cannot be directly incorporated or assured by in process and finished products inspections and testing rather it has to be incorporated in the manufacturing process itself. Process Validation helps in controlling all the parameters so that the finished product meets all the specifications and quality attributes. Various critical parameters involved in the process were identified with the help of process capability and thereby evaluating and challenging its lower and upper specifications. Three initial batches of same size, method, equipment and validation criteria were chosen. Other critical parameters involved in sifting, dry mixing, wet mixing, granulation, drying, sifting and sizing, lubrication, compression and coating stages were identified as per the Validation Master Plan. The outcome of the research work was that the process validation is providing the products that provide high degree of assurance that manufacturing process is producing products meeting its predetermined specifications and quality attributes.Downloads
References
Alam M, Pharmaceutical Process Validation: An Overview, Journal of Advanced Pharmacy Education & Research, 2012; 2(4): 185-200.
Kruse N, EMA Guidance documents on process validation - where are we, Danish Health and Medicines Authority, 2014; 1-24.
Guidance for Industry: Process Validation: General Principles and Practices. U.S. Department of Health and Human Services, Food and Drug Administration, Centre for Drug Evaluation and Research (CDER), Centre for Biologics Evaluation and Research (CBER), Centre for Veterinary Medicine (CVM), January 2011.
Morrison R, Process Validation: Practical Aspects of the
Redmond A, Calnan N and Neil S, The FDA
Shruthi N, Gupta N, Raghunandan H and Kashyap U, USFDA Guidelines on Process Validation - A Review, International Journal of PharmTech Research, 2014; 6(3): 920-923.
Nash R and Wachter A, Pharmaceutical Process Validation, Third Edition, Volume 129, Marcel Dekker Inc, 2003: 41- 44, 159
Katz P and Campbell C, FDA 2011 Process Validation Guidance: Process Validation Revisited, 2011: 3-12.
Jatto E and Okhamafe A, An Overview of Pharmaceutical Validation and Process Controls in Drug Development, Tropical Journal of Pharmaceutical Research, 2002; 1(2): 115-122.
Annex 3, Guidelines on good manufacturing practices: validation, Appendix 7: non-sterile process validation, WHO Expert Committee on Specifications for Pharmaceutical Preparations Forty-ninth report: 75-86.
Pluta P, FDA Lifecycle Approach to Process Validation - What, Why and How? Journal of Validation Technology, 2011; 1(1): 51-61.
Pharmaceutical Inspection Convention, PI-006-3, Validation Master Plan, Installation and Operational Qualification, Non-Sterile Process Validation Cleaning Validation, Pharmaceutical Inspection Co-operation Scheme, 2007: 5-16.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (SeeThe Effect of Open Access).
- The author must submit Copyright form After acceptance of the article.
How to Cite
